Home Page

POLLUTANT	BACT 1. Technologically Feasible/ Cost Effective 2. Achieved in Practice	TYPICAL TECHNOLOGY
POC	1. Low VOC fountain solution (<6% by vol.); and automatic blanket & roller wash w/ solvent capture & recycle; and cleanup solvents w/ <2.5 lb VOC/gal or VOC vapor pressure <5 mm Hg; and kerosene-like oil based inks. If cost-effective, capture and vent VOC to afterburner or carbon adsorption system w/ >98.5% destruction/recovery device efficiency; or VOC outlet <10 ppmv^a,b,T 2. Low VOC fountain solution (<8% by vol.); and minimum possible VOC blanket wash & roller & tray washes; and cleanup solvents w/ <7.5 lb VOC/gal and VOC vapor pressure <25 mm Hg or <30% by vol. VOC; and kerosene-like oil based inks^a,T	1. Low VOC Coatings and Solvents; or BAAQMD Approved Collection System and Abatement Device^a,b,T 2. Low VOC Coatings and Solvents^a,T
NOx	1. n/a 2. n/a	1. n/a 2. n/a
SO₂	1. n/a 2. n/a	1. n/a 2. n/a
CO	1. n/a 2. n/a	1. n/a 2. n/a
PM₁₀	1. Oven venting to an afterburner (>0.3 sec. retention time at >1400^oF) w/ overall capture/ destruction efficiency >90%^a 2. Compliance w/Reg. 6, Visible Emissions^a	1. BAAQMD Approved Design and Operation^a 2. Good Operating Practice^a
NPOC	1. No or low NPOC solutions/washes and kerosene-like oil based inks, or approved abatement system, as for POC above^a,b,T 2. Low NPOC solutions/washes and kerosene-like oil based inks as for POC above^a,T	1. Low or no NPOC Coatings and Solvents; or BAAQMD Approved Abatement System^a,b,T 2. Low NPOC Coatings and Solvents^a,T

Source:	Lithographic or Offset Printing - Heatset	Revision:	4
Source:	Lithographic or Offset Printing - Heatset	Document #:	110.1.1
Class:	All	Date:	08/24/98