BAY AREA AIR QUALITY
MANAGEMENT DISTRICT |
Source Category
| Source: | Spray Booth - Coating of Motor Vehicle and Mobile Equipment, Rework or Bodyshop | Revision: | 2 |
| Document #: | 161.3.1 | ||
| Class: | <40 lb/day Emissions (Uncontrolled) | Date: | 12/16/91 |
Determination
POLLUTANT |
BACT 1. Technologically Feasible/ Cost Effective 2. Achieved in Practice |
TYPICAL TECHNOLOGY |
| POC | 1. Coating w/ VOC
content and transfer efficiency complying w/ Reg. 8, Rule 45, and emissions controlled to
overall capture/ destruction efficiency >90%a,b,T 2. Compliance w/ Reg. 8, Rule 45a,T |
1. Collection System
Vented to Carbon Adsorber System or thermal Oxidizera,b,T 2. Complying Coatings and Coating Equipment (HVLP or Electrostatic or other BAAQMD approved applicator)a,T |
| NOx | 1. n/a 2. n/a |
1. n/a 2. n/a |
| SO2 | 1. n/a 2. n/a |
1. n/a 2. n/a |
| CO | 1. n/a 2. n/a |
1. n/a 2. n/a |
| PM10 | 1. n/d 2. n/s |
1. n/d 2. Dry Filters or Waterwash, Properly Maintaineda |
| NPOC | 1. Coating w/ solvent
content and transfer efficiency complying w/ Reg. 8, Rule 45, and emissions controlled to
overall capture/ destruction efficiency >90%a,b,T 2. Compliance w/ Reg. 8, Rule 45a,T |
1. Collection System
Vented to Carbon Adsorber Systema,T 2. Complying Coatings and Coating Equipment (HVLP or Electrostatic or other BAAQMD approved applicator)a,T |
References
| a. BAAQMD b. Generally considered to be cost-effective if uncontrolled emissions >40 lb/day T. TBACT |