BAY AREA AIR QUALITY MANAGEMENT DISTRICT
Best Available Control Technology (BACT) Guideline

Source Category

Source: Oven (Topcoat and/or Primer) -
Coating of Motor Vehicles, Assembly Plant		 Revision: 3
Document #: 161.4.3
Class: All Date: 06/09/95

Determination

POLLUTANT

 BACT
1. Technologically Feasible/ Cost Effective
2. Achieved in Practice		 TYPICAL TECHNOLOGY
POC 1.  Coating w/ VOC content less than and transfer efficiency greater than that required by Reg. 8, Rule 13, and emissions controlled to overall capture/ destruction efficiency >90%a,T
2.  Coating w/ VOC content and transfer efficiency complying w/ Reg. 8, Rule 13, and emissions controlled to overall capture/ destruction efficiency>85%a,T		 1. BAAQMD Approved Collection System Vented to Carbon Adsorber or Afterburnera,T


2. BAAQMD Approved Collection System Vented to Carbon Adsorber or Afterburnera,T
NOx 1. n/a
2.  n/a		 1.  n/a
2. n/a
SO2 1. n/a
2.  n/a		 1.  n/a
2. n/a
CO 1. n/a
2.  n/a		 1.  n/a
2. n/a
PM10 1. n/d
2.  n/s		 1.  n/d
2. Dry Filters or Waterwash, Properly Maintaineda
NPOC 1.  Coating w/ solvent content less than and transfer efficiency greater than that required by Reg. 8, Rule 13, and emissions controlled to overall capture/ destruction efficiency >90%a,T
2.  Coating w/ VOC content and transfer efficiency complying w/ Reg. 8, Rule 13, and emissions controlled to overall capture/ destruction efficiency>85%a,T		 1. BAAQMD Approved Collection System Vented to Carbon Adsorbera,T


2. BAAQMD Approved Collection System Vented to Carbon Adsorbera,T

References

a. BAAQMD
T. TBACT