BAY AREA AIR QUALITY
MANAGEMENT DISTRICT |
Source Category
| Source: | Spray Booth - Coating of Wood Products | Revision: | 2 |
| Document #: | 161.8.1 | ||
| Class: | All | Date: | 09/13/00 |
Determination
POLLUTANT |
BACT 1. Technologically Feasible/ Cost Effective 2. Achieved in Practice |
TYPICAL TECHNOLOGY |
| POC | 1. Coatings w/ VOC content
less than that required by Reg. 8, Rule 32, and
emissions controlled to overall capture/ destruction efficiency > 90%
by weight a,b 2. Coatings w/ VOC content less than that required by Reg. 8, Rule 32 a,b |
1. Collection System
Vented to Carbon Adsorber or Afterburner a,b 2. Use of coatings with very low VOC contents (such as waterborne coatings, higher solids coatings, uv-cured coatings, polyester or polyurethane coatings, higher solids nitrocelluose lacquers, and solvent-substituted coatings) a,b |
| NOx | 1. n/a 2. n/a |
1. n/a 2. n/a |
| SO2 | 1. n/a 2. n/a |
1. n/a 2. n/a |
| CO | 1. n/a 2. n/a |
1. n/a 2. n/a |
| PM10 | 1. n/d 2. n/s |
1. n/d 2. Dry Filters or Waterwash, Properly Maintaineda |
| NPOC | 1. Coatings w/ solvent
content less than that required by Reg. 8, Rule 32,
and emissions controlled to overall capture/ destruction efficiency >90%
a,b 2. Coatings w/ VOC content less than that required by Reg. 8, Rule 32 a,b |
1. Collection System
Vented to Carbon Adsorber a,b 2. Use of coatings with very low VOC contents a,b |
References
| a. BAAQMD
Interoffice Memorandum from B. Young to W. deBoisblanc dated 9/26/00
titled "Spray Booth BACT, Coating of Wood Products, and
Cost-Effectiveness of Add-On VOC Control. b. BAAQMD Permit Application #1146 |