Webcast Support

Watch or listen to select Air District meetings on your computer, tablet, or mobile device. Many Air District meetings and workshops are available to stream live and view in our archive.

See below for troubleshooting tips, or to submit a webcast support request.

Air District Webcasts

The Air District’s video webcasts, both live streaming and archive, include meeting agendas with closed captioning (CC) and video jump-points. In the archive webcasts, the jump-points allow you to use the agenda as a table of contents and skip directly to the beginning of each video segment.

Live streaming webcasts are available on our homepage and respective program pages. Video streaming requires the use of media plugins. While the necessary plugins will often come pre-installed, you may need to install or enable plugins to watch streaming video. We recommend installing the Adobe Flash Player and Microsoft Silverlight plugins if they are available for your system.

Air District Web Streaming

Due to the current shelter-in-place order, until further notice, all Air District meetings will be either cancelled or held remotely via webcast.
More Information  >
  • Virtual Public Workshop (Zoom Meeting) – Draft Amendments to Regulation 6, Rule 5: Particulate Emissions from Refinery Fluidized Catalytic Cracking Units

    Streaming live on 2/04 at 6:00 PM
    Video link(s) will be active 5 minutes before meeting time.
    Join on ZOOM to comment during the meeting
  • Updated Path to Clean Air CERP Design Team

    Archive link will be available 24-48 hours after event


There are currently several known technical issues between the video streaming player used for live webcasts and recent versions of several browsers - these problems are affecting users who previously were able to view the Webcasts with these browsers. If you are having problems viewing a webcast, start by making sure your browser software is up to date. If the problem persists, refer to the workarounds described below.


Autoplay Issues: Users who are experiencing issues where the video player appears but will not begin to play within Chrome may need to adjust the autoplay settings - Chrome recently made a change that now requires autoplay to be allowed with no user gesture or action.

  1. Copy and paste chrome://flags/#autoplay-policy in your chrome browser URL bar and hit Enter.
  2. Change the Autoplay Policy to No User Gesture Required
  3. Click Relaunch Now to relaunch your browser and apply the change.
  4. Refresh or open the page with the webcast or webcast archive and play it to ensure the setting has worked

Enable Flash

  1. Click the Chrome customization menu (Chrome Menu Icon) in the upper right-hand corner of the browser
  2. Select Settings from the drop-down menu
  3. At the bottom of the page, click Show advanced settings...
  4. Under the Privacy section, click the Content settings... button
  5. A Content Settings window opens; scroll down until you see the Flash section
  6. Select the option labeled Allow sites to run Flash
  7. Click Done at the bottom right of the window
  8. Refresh or open the page with the webcast or webcast archive and play it to ensure the setting has worked

Additional compatibility and technical information for the integration of Adobe Flash in Chrome can be found on the Adobe Flash / Chrome Help webpage.


Users who are experiencing issues with Firefox may need to update the Flash player (Adobe Flash Help) in Firefox or ensure that the Adobe Flash Player is enabled. To check the setting and enable Flash:

  1. Click the Tools menu in the browser window
  2. Select Add-ons from the drop-down list.
  3. Select Plugins from the menu on the left of the Add-ons page
  4. Select Shockwave Flash in the list and click the drop-down menu to its right
  5. Select  Always Activate
  6. Close the dialog box and refresh your page

Microsoft Edge

Edge users will need to adjust the setting that enables Adobe Flash to run - to do so, complete the following steps:

  1. Click the ellipse (...) at the top right to access the Edge menu and select Settings 
  2. Scroll down to the Advanced Settings section
  3. Click the View advanced settings button
  4. Locate the Use Adobe Flash Player section
  5. Toggle the switch On to enable Adobe Flash Player.
  6. Refresh the webcast streaming video page

Other Recommended Browsers

Alternatively, we recommend viewing live webcasts in Safari (version 6.0.5 or newer) on Mac OS X and Microsoft Internet Explorer (version 11 or newer) on Windows (Vista, 7, 8, or 10).

Mobile users can access the webcasts with iOS (version 9.3 or newer) and Android (version 6.0 or newer).

Closed Captions

Please note that closed captioning may contain errors and omissions, and are not certified for their content or form.

Assistance and Support

If you are having problems with webcast streaming that are not covered above, please see the following resources:

If you are experiencing other technical difficulties or issues with a webcast, please contact the Air District Web Team by submitting a webcast support request below. 

Webcast Support Request

If you are experiencing other technical difficulties or issues with a webcast, please contact the Air District Web Team by submitting a webcast support request.

Webcast Support
 Submit a Support Request  

Contact Us

Air District Webmaster, Information Services


Contact Us

Spare the Air Status

Last Updated: 6/4/2018