Registration for Dry Cleaning Equipment

Any owner or operator of dry cleaning equipment that is exempt from Regulation 2, Rule 1, Sections 301 and 302 (obtaining an Authority to Construct/Permit to Operate) must register each dry cleaning machine (see Regulation 8, Rule 17, Section 404 and Regulation 2, Rule 1, Section 120).

Dry Cleaning equipment that meets the following criteria is exempt from obtaining a Permit to Operate:

  • On a facility-wide basis, gross consumption of petroleum solvent or any other non-halogenated solvent is less than 200 gallons in any consecutive 12-month period
  • The equipment does not use solvent that contains more than 1% by weight of any other halogenated compound, such as perchloroethylene.
  • The equipment does not use solvent that would cause emissions to exceed trigger levels in Regulation 2, Rule 5.

You are required to keep your registration current as long as you operate your equipment subject to the regulation.

Online Permitting System
Eligible facilities can log in to apply for new registrations and renewals on the Air District's online permitting system web page. 

Fees

The registration fees are set forth in Regulation 3, Schedule R. Both initial registration fee and annual fee are for each dry-cleaning machine. Late registrations and late payment penalties may apply.

Renewal

Depending on the permit or registration expiration date for your facility, you will receive renewal notices accordingly on an annual basis. Renewal invoices are typically sent out 30 to 60 days before expiration.

Contact Us

Asbestos, Compliance & Enforcement

415.749.4762 asbestosjobs@baaqmd.gov

Compliance & Enforcement
Underground Tanks

415 749.4999

Online Permitting System Help Desk, Engineering

415.749.8665 PermitHelp@BAAQMD.gov

Grants Programs Information Request Line, Strategic Incentives

415.749.4994 grants@baaqmd.gov

Engineering
General Engineering Information

415.749.4990 permits@baaqmd.gov

Contact Us

Spare the Air Status

Last Updated: 6/21/2021